Used BEWO Steel Pipe Cutting Centre for sale

Used BEWO Steel Pipe Cutting Centre for sale

Used Bewo sawing centre for sale

We are selling a used Bewo steel cutting centre that has only become available as a consequence of our client’s ongoing investment in it business.  This cutting centre has many years profitable use left.  Used for cutting steel pipes, this centre has alternative uses.

The centre comprises:

  • Sawing Centre:

OEM – Bewo: Model Type – ECH108 M 1995: Serial No – 800737

  • Adjustable Outfeed Conveyor:

OEM – Bewo: Model Type – DB-70: Serial No – 9812048

Comes complete with OEM Technical Documentation Folder and comprehensive Maintenance Folder.

One owner from new, maintained initially under a BEWO service contract and more lately by Bluebay Technical. Most recent service 27 March 2017.

This saw centre has been used for the cutting of carbon steel pipe and tube up to 2mm gauge thickness, however 3mm cutting has been performed albeit at a slower rate.

Variable speed saw setting can be performed via the interface screen, outfeed conveyor fully adjustable up to 3000mm, with a loading capacity of 7000mm.

Machine has very well looked after and maintained regardless of cost as any inspection will testify.

A quantity of circular saw blades will be made available as well as assistance in removing the machinery from its location.

Buyer will be responsible for lifting, loading and rigging.

Item is located in North West England.

Nominal footprint: 13m x 4.64m.

The saw (lot 23b) and outfeed conveyor (lot 23a) are being offered separately, or you could buy both (lot 23).

Link to the Bidspotter auction:Bidspotter

Wheelabrator MLK1500-2 Automated Table Shot Blasting Machine for Sale by Online Timed Auction

We are selling an excellent example of a used table blasting machine by the highly respected OEM Wheelabrator, part of the Norican group of companies.

 

Wheelabrator MLK1500-2 Automated Table Shot Blasting Machine for Sale by Online Timed Auction

 

OEM – Wheelabrator

Model – MLK1500-2

Contract No – 170029

YOM – 2001

There will be an OEM operating manual available with the sale.

Current run hours (client advises as genuine) are 1,477 – this equates to 86 Hours a year or 1.89 Hrs per week based on a 46 week working year.

Now available as part of an upgrading and reorganisation plan at our client’s site in Birmingham, West Midlands, used wheelabrators rarely come to the market in this condition with so little apparent use.

The overall nominal footprint of this second hand Wheelabrator MLK1500-2 shot blasting machine is :

1900mm Wide

1700mm Deep

4620mm High

When both doors are fully open the the machine has a width of approximately 4500mm.

These dimensions allow the machine to occupy a very small footprint, making it a sound investment to those companies who may be tight on factory floor space and/or may wish to bring what could be a sub-contracted process in-house, in order to have better control of their manufacturing cycle.

The machine is fully operational and can be demonstrated working and will be sold with or without the current media that is in the machine.

A particular feature of this second hand table blasting machine is that it has two high efficiency blast wheels enabling an increased coverage of media to component(s), so as to reduce cycle times to a minimum, thus saving energy and wear to the machine.

Please see the videos proving this as you will see how short the cycle time was to shotblast an item.

All the internal linings and table are in excellent condition, with no sign of blow holes, no shot leaking out of the machine and both blast wheels appearing to be showing little signs of wear.

The doors are fully interlocked during and for a short time after the process, thereby complying with the stringent health and safety requirements needed for machinery of this type.

There will be assistance given during the collection of the item (our client will disconnect & isolate mains services)  and some further help will be given in skating the item out of the building. The buyer however will be responsible for lifting, loading and rigging.

The machine is located in Birmingham, West Midlands.

In our opinion this is the best used table shotblasting machine in the market that can be demonstrated working, to any interested party and any inspection of the machine is invited/welcome.

The auction will be hosted through Bidspotter – to bid/buy you will need to be registered with Bidspotter.   Auction starts to close at 3pm BST Thursday 29th March 2018.

Catalogue now open and you can bid.

Viewing day – 28 March 2018 – you will need to book in via ADS several days beforehand as entry is strictly by appointment only and on our client’s terms.

Clicking on the word Bidspotter will take you to the auction.

 

3 Used Skid Mounted Industrial Hydraulic Packs for sale

As the sole selling agent for a client who are reorganising their business, we are selling 3 skid mounted industrial hydraulic packs.

Being sold by an online timed auction due to close 3pm on 29 March 2018

Viewing day 28 March 2018. These hydraulic packs are all located in Shropshire

Available singularly

To go to the auction just click on the word Bidspotter .

Used Amada Octo 334 NC Punch Press with Fanuc Control for sale

As the sole selling agent for a client who are further investing in their business, we are selling a used Amada Octo 334 NC Punch Press with Fanuc Control.

Capacity – 30 Tonne      Configuration – C Frame     Control – Fanuc 6M 232C

Max Traverse – 750 x 1000mm. Max Sheet Size – 750 X 2000mm (with one repositioning)

Max Sheet Weight – 50Kg.   Axis Speed – 40M/Min.  Max SPM – 300

Press Motor – 5.5KW. Power – 12 KVA.   Air Pressure – 5.0Kg/cm/2

Air Supply – 650 L/PM. Machine Weight – 9,800Kg

Toolholders – Full Set (One toolholder requires attention)

Operational at point of disconnection

Being sold by an online timed auction due to close 3pm on 29 March 2018

Viewing day 28 March 2018.

To go to the auction just click on the word Bidspotter

Transmission drive system for sale

We are selling a transmission drive system made up of:

  • A Reliance Electric Motor
  • A Kebco Combistop Double C Face Spring-Set Brake  (Type 17)
  • A Nord Gearbox.

This ‘used’ drive system was purchased new and was never installed

Being sold by an online timed auction due to close 3pm on 29 March 2018

Viewing day 28 March 2018. This drive system is located in Shropshire.

To go to the auction just click on the word Bidspotter .

2 Nord Unicase Helical Bevel Gearboxes for sale by online timed auction

As the sole selling agent for a client who are reorganising their business, we are selling two Nord Unicase Helical Bevel gearboxes type – 90621W

One left hand, one right hand

Serial Numbers. – 800744430900 and 800744430400

Reduction ratio of 48:2:1 and a 1.625 inch diameter shaft

These items were purchased new and never installed

Being sold by an online timed auction due to close 3pm on 29 March 2018

Viewing day 28 March 2018. These items are located in Shropshire

Available singularly or as a pair

Here’s link to the auction – Bidspotter

OEM stinging you with sky high spare parts prices?

OEM stinging you with sky high spare parts prices

OEM stinging you with sky high spare parts prices?

Right now some original equipment manufacturers are charging sky high prices for spares, simply because they can. They use their exclusivity to drive you to buy new.

This can mean some machinery is simply not worthwhile repairing when it breaks down.

Or does it?

You see, you’re probably not the only one in that position.

Have you thought about looking in used plant auctions to source the parts you need? – you can often buy an entire machine for less than the cost of the parts from the OEM, you might even find a machine listed as spares or repair, you might even find the parts listed separately?

Alternatively ask us, we have a huge database of engineering and manufacturing companies, we can simply send out an email looking for the parts you need.

OEMs might not have you where they want you, you have options!

Used Volvo Coach for Sale

PLEASE NOTE THIS COACH HAS SOLD.  IF YOU ARE LOOKING TO DISPOSE OF ANY COACHES LIKE THIS,  PLEASE GET IN TOUCH

As the selling agent for a coach operator known for how well it looks after its vehicles, we are disposing of a used Volvo 9700 coach:

  • Volvo 9700H coach, first registered in October 2006
  • Presently configured for 43 seats, in order to give added legroom for longer tours
  • Approved for European work
  • Only ever used for holiday tours – UK and Europe – and day trips. Never been used for local services, eg schools
  • Well cared for ever since its purchase by its one, dedicated, driver
  • 465,410 genuine miles from new
  • Convertible back to its original 51 seater version, the additional 8 seats form part of the sale
  • Full service documentation available (just ask, there’s far too much to include here!)
  • Serviced and repaired throughout by an approved Volvo garage, using only Volvo parts (copy invoices available)
  • Dual gearbox (Auto & Manual); cruise control; 12 gears; brake retarder; sat nav; reversing camera; 2 tv screens capable pf playing DVDs, CDs and sat nav; centre toilet
  • MOT expires 25 April 2018
  • Condition commensurate with age

 

For sale by online auction that’s open now.  Click the word ‘Bidspotter‘ to go to the auction.]

Here’s the brochure…

PJ Hare 63 Tonne High Speed Hydraulic Press Transfer Line For Sale

3 PJ Hare 63 Tonne Presses and an ORIIMEC Robotic Transfer Line

3 PJ Hare 63 Tonne Presses and an ORIIMEC Robotic Transfer Line

We are selling a used automated hydraulic high speed press transfer line, comprising of the following:

  • 3 PJ Hare 63 GP C-frame Hydraulic Presses
  • An ORII MEC RY Flexible Robotic Handing / Transfer System, Loading Station / Destacker
  • Outfeed Conveyor
  • Two Tonne Scissor Lift.

Used press lines incorporating such respected OEM machines rarely come to the market.

Being sold by an online timed auction that is open now and due to close at 3pm on Tuesday 6th February 2018. Viewing days 31 January and I February 2018 – the line is located in Wales. We reserve the right to close the auction early if a proceedable offer is received before 6th February.

Removal date, disconnections and loading – Please read the important information in the auction as there are some very detailed terms in this respect. RAMS will be required.

To go to the auction – click here

Update 12 February 2018 – sorry the line has been sold!

USED WELDING EXPERT FOR WELD BEAD MEASUREMENT FOR SALE

We are selling by online auction, a used WELDING EXPERT HR – WELD BEAD MEASUREMENT STATION by ClaraVision:

ClaraVision welding bead measurement tool for sale

Serial Number – 1703561200

Being sold by online auction.

Here’s a link to our online brochure which gives more photographs of this second hand item … CLICK HERE

Click HERE to go to the OEM’s brochure

Click HERE to go to the auction page

Auction closes 18 January, be quick!